LED Light Housing DC24V Brushless Motor Automatic Barrier Gate with 6th BLDC Motor
Automatic Barrier Gate Features:
- Operation speed can be adjusted.
- Slow up and slow down can be adjusted.
- The limit angle can be adjusted.
- Left and right direction can be quickly interchanged.
- The barrier arm can be manually operated in case of power failure.
- 418 frequency learning code anti-copy remote controller.
- Infrared photocell sensor lO signal input function.
- Loop detector and radar IO signal anti-collision signal input function.
- Up, down and stop IO signal input function.
2. Technical specifications:
1. Operating temperature: -30°C to +60°C
2. Rated voltage: DC24V
3. Operating speed: 1.5 s to 8 s
4. Rated current: 9.5A
5. Rated power: 100W
6. No-load speed: 1850rpm
7. Rated speed: 1400rpm
8. Protection level: IP54
9. Maximum arm length: 6m
3. Safety Features:
1. Advanced electromechanical integration hoisting design concept: compact structure, quick assembly, and easy maintenance.
2. Advanced mold production concept: high precision, strong consistency, fast production efficiency, and guaranteed quality.
3. The design concept of the advanced two-stage gear and worm gear variable speed transmission: high precision, long life,
gate opening by manually when power off. It has many advantages such as no blockage, no oil leakage, high torque, low noise,
and can operate normally at minus 35 degrees.
4. Advanced brushless motor design concept: low power consumption, high efficiency, no heat generation, wide speed regulation range,
making the barrier gate rise and fall quickly and smoothly.
Barrier Housing Installation
1) Pouring the Base:
Determine the desired position for the barrier gate and pour a concrete base. The base dimensions should be approximately 150mm larger than the dimensions of the barrier gate, the thickness about 200mm.
2) Securing the Barrier Gate:
Drill holes at the predetermined positions and insert expansion bolts (M16*200). Place the control box in position and secure it firmly.
Debugging
After the complete assembly of the barrier gate, check that all components are properly aligned and securely fitted. Use the handwheel at the rear of the motor to perform a test UP and DOWN of the barrier arm. After confirming that everything is correct, power on for testing and adjust the barrier arm to ensure it is level.
Error Codes:
| EFF-01: Hall Fault | Check the motor or wiring. | This is usually due to the motor or motor wiring not
being properly connected. |
| EFF-02: Undervoltage Fault | Voltage is below 22.0V. | This could be due to insufficient voltage from the
power supply or battery. |
| EFF-03: Overcurrent Protection | Heavy load or damaged driver board, incorrect motor wiring. | Check if the motor wiring is properly connected and
replace the driver or adjust the load. |
| EFF-04: Stall Protection | The limit has not been reached after 5 continuous attempts. | Reset the limit points or check if there is an issue
with the limit device. |
Service
1) 1 Year Free Repair (Excludes barrier arm and remote control)
2) Lifetime Paid Repairs
3) Technical Support
The following conditions are not covered under free repair (or replacement):
1) Damage caused by user failure to install according to the manufacturer's service manual.
2) Damage due to unstable power supply, exceeding the system's specified voltage range, or non-compliance with national electrical safety standards.
3) Damage to the system's appearance due to improper installation or use by the user.
4) Damage caused by natural disasters or other uncontrollable factors.
5) Repairs needed after the warranty period has expired.
6) Services not promised by the manufacturer.
Wonsun is a professional manufaturer for barrier gate, boom barrier, sliding gate motor. If any interest, please contact me freely.
Email: keira@wonsunbarrier.com
Skype: zimin1314
Whatsapp: +86 185 0748 1610
Wechat: Keira_Xia
Intearking Barrier Gate 6m Arm with DC24V Brushless Motor For Parking lot SYSTEM
Product Tags:
|
|
LED Light Housing Automatic Barrier Gate DC24V Brushless Motor 6th BLDC Motor Images
|
